Only $49.95
On Clearance to make room for new Version 2.5
T his clearance item is sold as-is
If device does not work when you receive it
contact us within 48 hrs
All NEW Variable Voltage MyGo eCig Starter Kit
Version 2 Now Available - See Below for New Features
The standard package option contains:
Version 1.0 MyGo Variable Voltage Electronic Cigarette Functions
1) Adjust the Electronic Cigarette voltage from 3v to 6v by pressing the + of - button, the higher the voltage the more vapor produced from the Electronic Cigarette .
2) Short circuit self-protection. When atomizer resistance is below 1.3ohm, or incorrect usage (such as reverse battery) leading to short circuit, the Electronic Cigarette device will turn itself off.
3) The max working current is up to 1.5 amps. But we limit the atomizer resistance to 1.3ohms, if below 1.3 Ohms the Electronic Cigarette device will turn itself off.
4) Regulated output which keeps the voltage the same with each puff - regardless of your remaining Electronic Cigarette battery power. As the battery drains, the device will keep the Electronic Cigarette voltage consistent.
5) Vent hole on the bottom cap of the Electronic Cigarette device for added safety.
6) Turn the Electronic Cigarette device on and off by holding down the power button for 5 seconds.
7) Check the remaining battery voltage by pressing the Electronic Cigarette power button 7 times consecutively within 3 seconds.
8) Lock in the selected voltage by holding down the + and – button on the Electronic Cigarette simultaneously for 5 seconds. Unlock by doing the same. This is useful for when you find your desired voltage and don’t want it to change if the voltage buttons are accidentally pressed.
Version 2.0 MyGo Variable Voltage Electronic Cigarette Functions
2) Short circuit self-protection. When atomizer resistance is below 1.3ohm, or incorrect usage (such as reverse battery) leading to short circuit, the Electronic Cigarette device will turn itself off.
3) The max working current is up to 3.5 amps. But we limit the atomizer resistance to 1.3ohms, if below 1.3 Ohms the Electronic Cigarette device will turn itself off.
4) Regulated output which keeps the voltage the same with each puff - regardless of your remaining battery power. As the battery drains, the device will keep the voltage consistent.
5) NEW - Metal caps for both top and bottom of Electronic Cigarette device for added durability.
6) NEW - Larger 3mm Vent hole on the bottom cap of the Electronic Cigarette device for added safety
7) NEW - When you use a voltage meter or testing tool to test the Electronic Cigarette voltage, there will be only 0.2v voltage difference between the voltage without load (without atomizer attached) and the voltage under load (with atomizer attached) .
8) NEW - Turn the Electronic Cigarette device on and off by simultaneously pressing the power button 5 times within 3 seconds.
a. To lock the voltage in on the device turn the device on, set the voltage, then turn the device off by pressing the power button 5 times. Now press the power button 1 time and the device will operate at the voltage it was set to before you turned it off but the display will not illuminate when you press the voltage or power buttons and the voltage can’t be changed when in this mode. To turn the device back on completely with access to change the voltage with display functional just press the power button 5 times.
9) NEW - Remaining Electronic Cigarette battery charge is displayed by battery bar graphic on right of LCD screen.
10) NEW - Measure and display the resistance of the atomizer by pressing the power button 1 time. The atomizer ohm resistance will display on the screen for 3 seconds. 11) NEW - Will hold up to a 67mm battery which means 18650 batteries with nipple and/or protection circuit will fit and end cap will screw tightly closed as long as they are not longer than 67mm.
Variable Voltage MyGo Video
VIDEO
